Names and Functions of Parts

Hot Water Adapter	Cold Water Adapter	Flexible Hose
White Tube	Installation Tools Needed
Trouble Shooting Spray Angle If you spray outlet hole is clogged, you can remove the stray outlet by turning it 90 degree counter clockwise and pulling it down. After cleaning it, put it back and turn 90 degree clockwise to lock. You can select two different water spray angles by pulling the spray outlet tip up or pushing it back as illustrated.

Cold Water Line

1. Preparation Remove the existing toilet seat Turn off the water valve Flush toilet to drain tank completely Take out existing water pipe 2. Installation Install adapter beneath water tank Connect white water tube into adapter nipple Install main body

Hot Water Line

Hot water line to be connected to the tube to the hot water line of sink water line, as same procedure of cold water connection. Make sure the hot water tube is connected to the hot water inlet of Pilot Bidet?/SUP>

Trying your Pilot Bidet^?/SUP> for the First Time

Congratulations!! You are ready to use the Pilot Bidet?/SUP> for the first time. Be sure to turn water pressure control knob gently until reaching your desired pressure. Water pressure control device is only to control water pressure, not for setting up the duration of water spray.

Installation manuals

[ Natural Water | Warm Water | Built-in Heater | The Ultimate ]